AC-H(Fused cast β - alumina block)
Category:
Fused cast alumina
Tel:
E-mail:
Introduction
AC-H (Fused Cast β Alumina Block) is formed by a majority of beta alumina crystals and a slight portion of alpha alumina crystals in compact structure. Its property of base saturation enables a higher resistance to alkali vapor and it has excellent thermal shock resistibility and does not form molten droplets in campaign. AC-H (Fused Cast β Alumina Block) is the best material for melter crown, port crown and channel, etc.
Typical Chemical Composition:
Al2O3 92%
NaO2 7%
others 1%
Typical Crystallographic Analysis:
alpha alumina 2%
beta alumina 98%
Typical Physical Properties:
Item | Value | |
True Specific Gravity | 3.26g/cm3 | |
Refractoriness Under Load (0.2MPa) | 1700 ℃ | |
Cold Crushing Strength | 60MPa | |
Anti-erosion velocity of glass liquid under static state | 0.3mm/24h | |
Bulk density | PT | 2.8 g/cm3 |
WS | 3.1 g/cm3 |
Casting Technology
PT : Big Crown, Port Crown etc. Superstructure,Cover of Channel
WS :Big Crown, Port Crown etc. Superstructure,Cover of Channel
Normal Cast
Some shrinkage voids are formed under the casting scar in the annealing process.The blocks(PT)having such voids are usually installed and used in the area with no serious corrosion and the surface with scar is not used as working face,considering no influence for furnace performance and life.
Void Free Cast
Casting is performed with a large header in which most of the voids are concentrated.The header is subsequently cut off after cooling.The resultant block is compact and substantially void-free.AC-41 and AC-M are preferably in WS casting.
Key words:
AC-H(Fused cast β - alumina block)
Previous:
Next:
Message
Related Products